1 0

    Dyna-Tech

    Ring Burner for Casting, Forging, MetalWorking

    Ring Burner for Casting, Forging, MetalWorking

    Rs. 15,057.98
    Rs. 15,057.98
    Sale Sold out
    Tax included.
    Title

    Ring Burner for Casting and Forging Dies

    The Ring Burner provides uniform heating for casting and forging dies. Its durable construction and easy-to-use design make it the perfect choice for metalworkers. Achieve optimal results with the Ring Burner

    Innovative Design for Precision Heating

    The Ring Burner is designed to provide precise and uniform heating for casting and forging dies. Its circular shape allows for even distribution of heat, ensuring that your dies are heated to the correct temperature for optimal performance. The innovative design also makes it easier to control the temperature, so you can make the necessary adjustments to ensure the best results.

    Durable and Long-Lasting Material

    The Ring Burner is made from high-quality materials that are built to last. The stainless steel construction is resistant to corrosion, ensuring that your burner will last for years to come. The rugged design means that it can withstand the rigors of frequent use, making it the perfect choice for any metal forging or casting workshop.

    Easy to Use and Maintain

    Using the Ring Burner is simple and straightforward, even for those without experience. The adjustable temperature control makes it easy to get the right temperature for your specific needs, and the compact size makes it easy to store when not in use. The burner is also low maintenance, so you can focus on your projects and not worry about constantly having to clean or repair your equipment.

    Materials

    MOC: Stainless Steel

    Shipping & Returns

    Dimensions

    As per Requirements / Standard Optimised Dimesions

    Usage SOP

    STANDARD OPERATING PROCEDURE (SOP)

    Maximizing Life of Dyna-Tech Stainless Steel Foundry Tools

    OBJECTIVE

    To ensure long service life, consistent performance, and safe operation of Dyna-Tech stainless-steel foundry tools including pouring cups, skimmers, and funnels used for molten metal handling.


    PROCEDURE STEPS

    1. PREHEATING
    • Always preheat the tool uniformly to 250–300°C before first contact with molten metal.
    • Use a gas burner or furnace preheater to eliminate surface moisture and prevent thermal shock.
    • Never dip cold tools directly into molten aluminium.
    1. COATING APPLICATION
    • Apply a non-wetting coating (TPT 120 or equivalent Boron Nitride-based coating) on all molten-metal contact surfaces (ID & OD).
    • Use a brush or spray to achieve a uniform, thin layer.
    • Allow proper drying or curing as recommended by the coating supplier before use.
    • Reapply coating daily or whenever wear or metal sticking is observed.
    1. INSPECTION BEFORE USE
    • Visually check for cracks, deformation, oxide scaling, or missing coating before every shift.
    • Replace any damaged tools immediately to prevent metal contamination or tool failure.
    1. SKIMMING AND POURING PRACTICE
    • Skim molten aluminium thoroughly before using any pouring or handling tool.
    • Avoid dragging tools across the refractory floor; always lift and move smoothly.
    • Maintain steady, controlled motion during pouring to minimize turbulence and metal splashing.


    1. HANDLING AND PLACEMENT 
    • Do not strike or scrape tools against the furnace or ladle walls.
    • After use, place tools only on a heat-resistant stand or rack, never on a concrete or wet floor.
    • Avoid contact with water or cool surfaces when hot.
    1. CLEANING AFTER EACH SHIFT
    • When tools are warm (not hot), remove oxide or dross build-up using a soft wire brush or scraper.
    • Do not grind or hammer the surface — this damages the protective coating and shortens tool life.
    • Inspect coating condition and reapply if dull or worn.
    1. STORAGE
    • Store tools in a dry, covered area free from moisture, flux residues, or corrosive vapours.
    • Hang skimmers and smaller tools vertically; keep larger ones on wooden or insulated racks.
    • Never stack tools directly on each other without separators.
    1. PERIODIC MAINTENANCE
    • Perform a detailed inspection every week for wear, surface oxidation, or joint looseness.
    • Recoat or refurbish as required.
    • Record maintenance activity in the foundry tool log for traceability.


    SAFETY PRECAUTIONS

    ⚠️ Always wear appropriate Personal Protective Equipment (PPE): ⚠️

    • Face shield
    • Heat-resistant gloves
    • Leather apron
    • Safety shoes
    • Arm guards for extended pours
    View full details